Discussion:
HW requirment
(too old to reply)
matte
2004-12-18 11:28:59 UTC
Permalink
Hi,
I'need some council about hardware requirement for NG AI. I know the
minimal requirment and I have found some old posts regarding theese
issues, but I would like to know something more, and have some general
parameter of reference.

Processor:
is it necessary or recomanded a dual processor for a fw module? And
for the management console?

Ram:

i have found this post from Wayne:

(# standard connections * 70 bytes)
+
(# NAT connections * 120 bytes)
+
(# VPN tunnels * 3000 bytes)
+
3Mb for *nix/NT (for the fw.exe itself)


but, if I can't know how many standard/nat connections ecc. more or
less will pass through the firewall, a choose of 1Gb will be fine for
a medium size network?

And can you give me some parameter for the size of ram of the
management console?

Disks:

Is recomanded disk redundancy for the fw module and the management
console?
what kind redundancy?
What about the disks size?

Sorry for all these questions, but it's difficult for me to choose the
hardware, I don't have enough experience.

Thanks a lot.

Matte
Jeff Lord
2004-12-19 15:40:59 UTC
Permalink
matte pounded out on the keyboard on or about 18-Dec-04 06:28:

If this is a new installation for you, I'd recommend that you look at
the Nokia platform for running your FW-1 on.
CheckPoint and Nokia have a great partnership. We use the IP530 in an HA
setup and is fine for performance and throughput.
We also use the IP130s and IP330s for customers who require their own
site or application security.
And with the Nokia boxes, there is no "hardening" of the OS to be done.
(And then having to un-harden because Windows can't run properly without
some of the holes reopen.)
Take a look at both www.checkpoint.com and www.nokia.com
Good luck!

Jeff
Post by matte
Hi,
I'need some council about hardware requirement for NG AI. I know the
minimal requirment and I have found some old posts regarding theese
issues, but I would like to know something more, and have some general
parameter of reference.
is it necessary or recomanded a dual processor for a fw module? And
for the management console?
(# standard connections * 70 bytes)
+
(# NAT connections * 120 bytes)
+
(# VPN tunnels * 3000 bytes)
+
3Mb for *nix/NT (for the fw.exe itself)
but, if I can't know how many standard/nat connections ecc. more or
less will pass through the firewall, a choose of 1Gb will be fine for
a medium size network?
And can you give me some parameter for the size of ram of the
management console?
Is recomanded disk redundancy for the fw module and the management
console?
what kind redundancy?
What about the disks size?
Sorry for all these questions, but it's difficult for me to choose the
hardware, I don't have enough experience.
Thanks a lot.
Matte
Continue reading on narkive:
Loading...